1U BASS PREAMP

INPUT
Controls the gain of the whole preamp giving enough headroom for the rest of the stages in the preamp.
4 BAND EQ
4 bands of specially selected frequencies to hit the sweet spots in any enclosure.
When fully anti-clockwise each frequency is FLAT & gain is added as you turn them up.
PARAMETRIC EQ
Sweepable peaking EQ with switchable bandwidth. When button is out the Q is narrow & when pushed in the Q is wider.
Just like the previous EQ stage, when the gain is fully anti-clockwise, the frequency is not boosted.
SUB SHAPER
A specially designed filter has now been implemented into the Bass Preamp allowing you to tailor your sub tone through frequency, two shape controls and gain.
FILTER/CROSSOVER
The crossover section of the Bass Preamp has both variable high and low pass sections.
The high pass button allows to select one of the two 24dB/Oct Butterworth filters switchable between 35Hz when the button is out and 27Hz when pushed in
The low pass control is a fully variable 24dB/Oct filter allowing you to sweep between 40Hz - 100Hz with an additional Q control allowing you to shape the low pass to virtually any filter available.
PHASE BUTTON
This push-button allows a reverse phase of 180 degrees when pushed in.
OUTPUT
Controls the signal coming out the preamp.
KILL SWITCH
Mutes the output of the signal when in the up position
REAR CONNECTIVITY
Balanced XLR input & output.
IEC mains.

